DN178 Corundum + ABS Corundum Ceramic Diffuser For Tank Aeration
Product Description
Corundum Ceramic Diffuser is also called ceramic corundum aerator. Corundum aerator is divided into semi corundum aerator and full corundum aerator. Corundum aerator is an economic and effective treatment method for wastewater biochemical treatment. Many factors to improve the biochemical treatment effect, one of the most important factors is that there should be sufficient dissolved oxygen in the water. The new microporous ceramic aerator can make the oxygen in the air It is compressed by the blower and diffused into the water evenly through the microporous ceramic aerator. Because the bubble is small (the bubble diameter is about 3 mm, and the utilization rate of large oxygen on the gas-liquid contact surface is as high as 25%, compared with the traditional aeration equipment, the efficiency is increased by 5 times, and the operation energy consumption is reduced by 3 times. The ceramic microporous aerator has not only the technical performance of high efficiency and low consumption, but also the unique features of corrosion resistance, aging resistance and long service life The utility model has the advantages of being one of the ideal oxygen charging devices.
Product Features
1. The structure is simple. The original aerator has five parts, while the one-piece aerator has only three parts. It has fast assembly speed and easy installation and debugging at the bottom of the tank.
2. Good sealing performance, to prevent different materials from not contacting closely, resulting in air leakage. In the original aerator, the contact surface of the sealing part is large, and there are three kinds of materials in contact with three surfaces. If one side is uneven, there will be air leakage. Large bubbles will be generated in the aeration tank, which is to aerate both sides at the same time, which can make the sewage at the bottom of the tank more easily agitated and pushed upward. The two contact parts of the one-piece aerator are fired together, and there is no air leakage.
3. The surface area of corundum aerator is large. It is estimated that the surface area increases by nearly 75%, which also increases the aeration volume, improves the oxygen charging efficiency, or expands the service area. The one-piece aerator can reach 0.5-0.8m2/piece.
4. Good aeration and agitation. The original aerator only has positive aeration. The one-piece aerator has both positive and negative aeration at the same time, which can make the sewage at the bottom of the pool more easily agitated and pushed upward.
5. It is suitable for the sewage tank with large amount of corrosive sludge, with the specification of Ф 178mm.
Technology Parameter
| Model | Type | Porosity | Oxygen absorption rate | Service area(m³) |
| DN178 | corundum aerator | 36-42% | 16-25% | 0.3-0.75 |
| Size | Material | Average aperture | Resistance loss | Service life |
| 178mm | corundum+ABS | 200μm | 30-80mm | >2 years |
FAQ
Q: Are you a trading company or a manufacturer?
A: Manufacturer
Q: How long is your delivery time?
A: Usually 5-10 days, special case 15-20 days
Q: Do you provide samples? Is it free or extra?
A: Yes.the samples for free ,freight in your charge
Q: What is your payment terms?
A: Payment ≤ 20000 USD, 100% in advance. Payment ≥ $20000, 30% T / T in advance, balance before shipment.
Product Tags:
|
|
Tank Aeration Corundum Ceramic Diffuser / DN178 Air Diffuser Water Treatment Images
|
